Expansion Stages and System Capacity
59
Aastra 415/430 as of R3.2
syd-0344/1.6 – R3.2 – 09.2014
Aastra SIP terminals Aastra 6863i
Aastra 6865i
Aastra 6867i
Aastra 6869i
Aastra 6730i
Aastra 6731i
Aastra 6735i
Aastra 6737i
Aastra 6739i
Aastra 6753i
Aastra 6755i
Aastra 6757i
BluStar 8000i
10 50 50
Aastra BluStar Softphones 10 50 50
Standard SIP terminals 10 50 50
Aastra Mobile Client Controller 10 10 10
- Virtual terminals 20 100 100
Integrated mobile phones (with or without AMC) 20 100 100
Integrated mobile phones with an AMCC Compact/
AMCC 130
10/10 50/50 50/100
BRI-S Terminals on DSI-S interfaces (total) 10 50 50 8
3)
Terminals as per ETSI standard
• ISDN terminals
• ISDN PC cards
• ISDN LAN routers
• ISDN Terminal Adapters
10 50 50
FXS Terminals on FXS interfaces (total) 10 18 50 1
Analogue, nationally approved terminals
• Pulse dialling (PUL)
• Frequency dialling (DTMF)
• Radio units for cordless phones
• Door intercoms with DTMF control functions
• Group 3 fax machines
4)
• Answering machines
• Modems
10 18 50
External equipment can be switched via control outputs 1 1 1
External switches for controlling internal switch groups via
control inputs
10 18 50
General bell 1 1 1 per
node
1)
Of which at least 2 are IP system phones
2)
Operation on 2 DSI interfaces in each case
3)
Maximum of 2 simultaneous call connections.
4)
Transmission with the T.38 protocol is recommended for Fax over IP. The corresponding DSP resources need
to be allocated.
Inter-
face
Terminal type Terminal
Aastra
415
Aastra
430
AIN
with
430 as
Master
per
inter-
face
To Next Page
Loading...
