ABB 265DS - Mounting dimensions (not design data)

Technical data
IM/265D/V-EN-02 265Dx, 265VS 75
Pos: 23.59 /Übers chriften/1.1/1-s paltig/M - O/Montageabmess ungen (keine Konst ruktionsangaben) @ 1\mod_114 9058512625_3101.doc @ 27748
10.8 Mounting dimensions (not design data)
Pos: 23.60 /Übers chriften/1.1.1/1-s paltig/Differ enzdruckmessumfor mer mit Barrel-Gehäuse @ 17\ mod_1201169114234_3101.doc @ 154052
10.8.1 Differential pressure transmitter with barrel housing
Pos: 23.61 /Tec hnische Daten / Datenblatt/Druck/Druckmessumformer/Druckmessumformer 265Dx, 265Vx/Maßzeichnungen/Mess umformer mit Barrel-Gehäus e @ 5\mod_1165223965343_3101. doc @ 50073
117 (4.61)
Ø 83 (3.27)
54 (2.13)
96 (3.78)
41.3
(1.63)
9 (0.35)
58 (2.28)
114 (4.49)
23 (0.91)
20 (0.79)
71 (2.80)
70 (2.76)
26
(1.02)
186 (7.32)
108 (4.25)
30
(1.18)
90 (3.54)
61 (2.40)
M00160
+
-
1
2
3
4
9
8
7
10
13
6
5
15
16
11
12
14
Fig. 23: Dimensions in mm (inches), deviations in the drawing are possible
1 Terminal side 10 Electrical connection
2 Housing stop-screw 11 Name plate
3 Sensor plate 12 Housing cover
4 Process connection (conforms to IEC 61518) 13 Plate with key legend, etc.
5 With LCD display 14 Captive fixing screw for keyboard cover
6 Space for removing the cover required 15 Space for rotating the keyboard cover required
7 Additional tag plate, e. g. for marking measuring points (optional)
8 Drain/vent valve (optional)
9 Thread for fixing screws
(see "Process connections" data)
16 Upper or lower threaded bore (optional); 1/4-18 NPT for
drain/vent valve
Pos: 23.62 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830