Operation
44 265Dx, 265VS IM/265D/V-EN-02
Pos: 17.1 /Übersc hriften/1/A - C/Bedi enung @ 1\mod_1144675546171_31 01.doc @ 5944
7 Operation
Pos: 17.2 /Übersc hriften/1.1/1-spal tig/A - C/Bedienung mit den Tasten am Messumfor mer @ 2\mod_1150094711453_3101. doc @ 29314
7.1 Operation using the buttons on the transmitter
Pos: 17.3 /Bedienung/ Druck/Druckmess umformer/Allgemei n/Bedienung mit den Tast en am Messumformer @ 2\mod_115009 5014343_3101.doc @ 29336
The control unit on the transmitter consists of 2 buttons for external setting of the "lower range
value" (0 %) and "upper range value" (100 %) parameters, as well as a write protection switch.
Important
No housing entries are required for the buttons or switch.
To access the buttons, the screw must be slackened and the protective cap moved to one side
(see Fig. 17).
M00054
1
2
3
Fig. 17: Control elements
1 Protective cap
2 Mode button (M)
3 Buttons
M00055
Fig. 18: Plate with button legend, etc.
Warning - Potential damage to parts
Operating the control buttons with a magnetic screwdriver is not permitted.
Pos: 18 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
To Next Page
Loading...
