Safety
8 265Dx, 265VS IM/265D/V-EN-02
Pos: 5.7 /Übersc hriften/1.1/1-spal tig/A - C/Bestimmungs widrige Verwendung @ 2\mod_114 9665909453_3101.d oc @ 28255
1.3 Improper use
Pos: 5.8 /Sicher heit/Druck/Druck messumformer/Allgemei n/Bestimmungswi drige Verwendung @ 2\mod_114966580 9078_3101.doc @ 28234
It is prohibited to use the device for the following purposes:
• As a climbing aid, e.g., for mounting purposes
• As a support for external loads, e.g., as a support for pipes, etc.
• Adding material, e.g., by painting over the name plate or welding/soldering on parts
• Removing material, e.g., by drilling the housing.
Pos: 5.9 /Sicher heit/Allgemein/H inweis zur bestimmungs widrigren Verwendung (War tung/Reparatur) @ 0\ mod_1129707002440_3101.d oc @ 3240
Repairs, alterations, and enhancements, or the installation of replacement parts, are only
permissible insofar as these are described in the manual. Approval by ABB Automation
Products GmbH must be sought for any activities beyond this scope. Repairs performed by
ABB-authorized specialist shops are excluded from this.
Pos: 5.10 /Übersc hriften/1.1/1-spal tig/S - U/Technisc he Grenzwerte @ 2\mod_114966620 9312_3101.doc @ 28297
1.4 Technical limit values
Pos: 5.11 /Sicher heit/Druck/Druck messumformer/Allgemei n/Technische Grenz werte @ 2\mod_1149666073078_31 01.doc @ 28276
The device is designed for use exclusively within the values stated on the name plate and within
the technical limit values specified on the data sheets.
The following technical limit values must be observed:
• The permitted pressure may not be exceeded.
• The maximum operating temperature may not be exceeded.
• The permitted operating temperature may not be exceeded.
• The housing protection type must be observed.
Pos: 5.12 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830
To Next Page
Loading...
