ABB ACS355 - Page 195

Actual signals and parameters 195
1205 CONST
SPEED 4
Defines constant speed (or drive output frequency) 4. E: 20.0 Hz
U: 24.0 Hz
0.0…500.0 Hz /
0…30000 rpm
Speed in rpm. Output frequency in Hz if parameter 9904
MOTOR CTRL MODE setting is SCALAR: FREQ.
1 = 0.1 Hz
/ 1 rpm
1206 CONST
SPEED 5
Defines constant speed (or drive output frequency) 5. E: 25.0 Hz
U: 30.0 Hz
0.0…500.0 Hz /
0…30000 rpm
Speed in rpm. Output frequency in Hz if parameter 9904
MOTOR CTRL MODE setting is SCALAR: FREQ.
1 = 0.1 Hz
/ 1 rpm
1207 CONST
SPEED 6
Defines constant speed (or drive output frequency) 6. E: 40.0 Hz
U: 48.0 Hz
0.0…500.0 Hz /
0…30000 rpm
Speed in rpm. Output frequency in Hz if parameter 9904
MOTOR CTRL MODE setting is SCALAR: FREQ. Constant
speed 6 is used also as jogging speed. See section Control
of a mechanical brake on page 157.
1 = 0.1 Hz
/ 1 rpm
1208 CONST
SPEED 7
Defines constant speed (or drive output frequency) 7.
Constant speed 7 is used also as jogging speed (see
section Control of a mechanical brake on page 157) or with
fault functions (3001 AI<MIN FUNCTION and 3002 PANEL
COMM ERR).
E: 50.0 Hz
U: 60.0 Hz
0.0…500.0 Hz /
0…30000 rpm
Speed in rpm. Output frequency in Hz if parameter 9904
MOTOR CTRL MODE setting is SCALAR: FREQ. Constant
speed 7 is used also as jogging speed. See section Control
of a mechanical brake on page 157.
1 = 0.1 Hz
/ 1 rpm
All parameters
No. Name/Value Description Def/FbEq