7
Electrical installation – North
America (NEC)
Contents of this chapter
This chapter gives instructions on wiring the drive.
Safety
WARNING!
If you are not a qualified electrical professional, do not do installation or
maintenance work. Obey the safety instructions of the drive. If you ignore them,
injury or death, or damage to the equipment can occur.
Required tools
To do the electrical installation, you need these tools:
• wire stripper
• screwdriver set (Torx, flat and/or Phillips, as appropriate)
• torque wrench.
Required tools
• wire stripper
• screwdriver and/or wrench with a set of suitable bits
Electrical installation – North America (NEC) 113
To Next Page
Loading...
