ABB ACS880-11 - Disconnecting Integrated EMC Filter (Option +E200 or +E202) and Ground-To-Phase Varistor - Frame R6

￭ Disconnecting integrated EMC filter (option +E200 or +E202) and
ground-to-phase varistor – frame R6
1.
Stop the drive and do the steps in section Electrical safety precautions (page 15)
before you start the work.
2. Remove the front cover.
3. Remove the VAR screw.
4. Remove the EMC AC and/or EMC DC screw.
3
4
EMC
AC
EMC
DC
VAR
4
Electrical installation – IEC 91