ABB ACS880-11 - Basic Code; Option Codes

￭ Basic code
DescriptionCode
Product seriesACS880
Type
Regenerative wall-mounted drive. When no options are selected: IP21 (UL type 1),
cable entry from bottom, ACS-AP-W Assistant control panel with a bluetooth interface,
no EMC filter, ASC880 primary control program, Safe torque-off, coated boards, quick
installation and start-up guide.
11
Size
See section Ratings (page 161) in the technical data.
xxxx
Voltage range
380…415 V. This is indicated in the type designation label as typical input voltage level
3 ~ 400 V AC.
3
380…500 V. This is indicated in the type designation label as typical input voltage levels
3 ~ 400/480/500 V AC.
5
￭ Option codes
DescriptionCode
IP55 (UL Type 12)B056
Flange mountingC135
EMC filter for 2nd environment TN (grounded) system, category C3E200
EMC filter for second environment IT (ungrounded) system, category C3E201
EMC filter for 1st environment TN (grounded) system, category C2E202
Common mode filterE208
Cable conduit entry (US/UK).H358
No control panel0J400
DPMP-01 door mounting kitJ410
DPMP-02 door mounting kit (surface mounting) for the panelJ413
ACS-AP-I control panelJ425
FDNA-01 DeviceNet™ adapter moduleK451
FPBA-01 PROFIBUS DP adapter moduleK454
FCAN-01 CANopen adapter moduleK457
FSCA-01 RS-485 (Modbus/RTU) adapter moduleK458
36 Operation principle and hardware description