ABB ACS880-11 - Disconnecting Integrated EMC Filter (Option +E200 or +E202) and Ground-To-Phase Varistor - Frame R3

￭ Disconnecting integrated EMC filter (option +E200 or +E202) and
ground-to-phase varistor – frame R3
1.
Stop the drive and do the steps in section Electrical safety precautions (page 15)
before you start the work.
2. Remove the front cover.
3. Remove the EMC screw.
4. Remove the VAR screw.
EMC
VAR
3
4
90 Electrical installation – IEC