SeeTask
Firmware manual
Commission the drive.
Quick start-up guide for the drive
Terms and abbreviations
DescriptionTerm
Industrial assistant non-Bluetooth control panelACS-AP-I
Industrial assistant control panel with Bluetooth interfaceACS-AP-W
The part in which the control program runs.Control unit
DC circuit between rectifier and inverterDC link
Energy storage which stabilizes the intermediate circuit DC voltageDC link capacitors
Optional mounting platform for door mounting of control panelDPMP
Mounting platform for control panel (flush mounting)DPMP-01
Mounting platform for control panel (surface mounting)DPMP-02, DPMP-03
Frequency converter for controlling AC motorsDrive
Embedded fieldbusEFB
Electromagnetic compatibilityEMC
Optional analog I/O extension moduleFAIO-01
Optional CANopen® adapter moduleFCAN
Optional ControlNet™ adapter moduleFCNA-01
Optional digital I/O extension moduleFDIO-01
Optional EtherCAT® adapter moduleFECA-01
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP® and
PROFINET IO® protocols, 2-port
FENA-21
Optional Ethernet POWERLINK adapter moduleFEPL-02
Optional digital I/O extension moduleFIO-01
Optional analog I/O extension moduleFIO-11
Optional PROFIBUS DP® adapter moduleFPBA-01
Physical size of the drive or power moduleFrame, frame size
Safety functions module which supports the FSE-31 module and the use
of safety encoders
FSO-21
Safety functions module which does not support the use of encodersFSO-12
Optional functional safety modulesFSO-12, FSO-21
Insulated gate bipolar transistorIGBT
DC circuit between rectifier and inverterIntermediate circuit
Converts direct current and voltage to alternating current and voltage.Inverter
Remote monitoring toolNETA-21
With fieldbus protocols based on the Common Industrial Protocol (CIPTM),
such as DeviceNet and Ethernet/IP, denotes the control of the drive using
the Net Ctrl and Net Ref objects of the ODVA AC/DC Drive Profile. For
more information, see www.odva.org.
Network control
Introduction to the manual 23
To Next Page
Loading...
