R8
PE (Ground): 9.8 N·m (7.2 lbf·ft)L1, L2, L3, T1/U, T2/V, T3/W: 30 N·m
(22.5 lbf·ft)
Note: For frame R8: Install the side plates if removed.
Note: For frame R8: The power cable connectors can be detached. For the
instructions, see section R8 power cable connection if you detach the
connectors (page 123).
9. For frame R6 types bigger than -040A-x: Cut tabs in the shroud for the installed
cables.
122 Electrical installation – North America (NEC)
To Next Page
Loading...
