Applicable standards
The drive complies with the following standards.
European electrical safety requirements product standards
Adjustable speed electrical power drive systems. Part 5-1: Safety requirements –
electrical, thermal and energy
EN 61800-5-1:2007
Safety of machinery. Electrical equipment of machines. Part 1: General require-
ments.
Provisions for compliance: The final assembler of the machine is responsible for
installing:
EN 60204-1:2006
+A1:2010
• emergency-stop device
• supply disconnecting device
• IP00 drive module into a cabinet.
Degrees of protection provided by enclosures (IP code)
EN 60529:1991 + A2:2013
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
EN 61800-3:2004 +
A1:2012
UL Standard for Safety, Power Conversion Equipment, fourth edition
UL 508C: 2016
General Requirements - Canadian Electrical Code, Part II
CSA C22.2 No. 0-10
Industrial control equipment
CSA C22.2 No. 14-13
Adjustable Speed Drives
CSA C22.2 No. 274-13
Markings
These markings are attached to the drive:
CE mark
Product complies with the applicable European Union legislation. For fulfilling the EMC requirements,
see the additional information concerning the drive EMC compliance (IEC/EN 61800-3).
TÜV Safety Approved mark (functional safety)
Product contains Safe Torque Off and possibly other (optional) safety functions which are certified
by TÜV according to the relevant functional safety standards. Applicable to drives and inverters;
not applicable to supply, brake or DC/DC converter units or modules.
UL Listed mark for USA and Canada
Product has been tested and evaluated against the relevant North American standards by the Un-
derwriters Laboratories. Valid with rated voltages up to 600 V.
EAC (Eurasian Conformity) mark
Product complies with the technical regulations of the Eurasian Customs Union. EAC mark is required
in Russia, Belarus and Kazakhstan.
Electronic Information Products (EIP) green mark
The product complies with the People’s Republic of China Electronic Industry Standard (SJ/T 11364-
2014). The product does not contain toxic and hazardous substances or elements above the
maximum concentration values, and it is an environmentally-friendly product which can be recycled.
Technical data 193