Layout example, door open (standard drive module
configuration)
PE
T3/W2
T2/V2
T1/U2
1
4
5
6
7
3
2a
2a
13
13
10
11
3
2c
L1/U1
L2/V1
L3/W1
2b
14
12
A
A
A – A
15
3
9
B– B
16
8
B
B
2c
LCL filter module8Supporting frame of the cabinet1
Motor cable including the protective ground con-
ductor of the drive module
9
Vertical (2a) and horizontal (2b) air baffles that
separate the cool and hot areas (leakproof
entries). See section Preventing the recirculation
of hot air (page 56).
2a
Drive module control unit102b
External control cables11
Optional air baffle that is needed when there is
no fan on the lower part of the cabinet door. See
section Preventing the recirculation of hot
air (page 56).
2c
Grounding screws12Cabinet grounding busbar (PE)3
Alternative to grounding screws (12)13Input power cable including the protective ground
conductor (PE) of the drive
4
Air flow to the roof14Disconnector and fuses5
Air flow through the drive module15Contactor6
Air flow through the LCL filter16Drive module7
Guidelines for planning the mechanical installation 53
To Next Page
Loading...
