ABB ACS880-34 Series - Drive Module Without Full-Size Output Cable Connection Terminals (Option +0 H371) and IP20 Shrouds (Option +0 B051) and with Common Mode Filter (Option +E208)

￭ Drive module without full-size output cable connection terminals
(option +0H371) and IP20 shrouds (option +0B051) and with common
mode filter (option +E208)
14
13
2
1
3
6
7
4
5
12
10
11
8
8
9
9
15
16
Auxiliary cooling fan9Lifting lugs1
PE busbar10Input cable connection busbars (L1/U1, L2/V1,
L3/W1) and DC+ and DC- busbars (UDC+, UDC-)
2
Main cooling fans11Circuit board compartment3
Base attaching screws12Output cable connection busbars (T1/U2, T2/V2,
T3/W2)
4
Pedestal guide plate13Common mode filter (option +E208)5
Telescopic extraction and insertion ramp14Pedestal6
Connector for charging circuit switch or contactor15Retractable support legs7
Cover. When removed, you can attach the drive
module to the LCL filter module.
16Handle for pulling the drive module8
Note: The front covers are removed in this photo, see numbers 3 and 4 in Standard drive module configuration.
36 Operation principle and hardware description