ABB ACS880-34 Series - Attaching the Drive Module to the LCL Filter Module; Attaching the Drive Module and the LCL Filter Module to the Cabinet Base; Grounding the Drive Module and the LCL Filter Module; Installing the Drive in Rittal VX25 Enclosure

You can attach the modules to Rittal VX25 enclosure with the mounting brackets delivered
with the drive, see Step-by-step drawings for an installation example of standard drive
configuration in Rittal VX25 800 mm wide enclosure (page 241).
Attaching the drive module to the LCL filter module
See Step-by-step drawings for an installation example of standard drive configuration in
Rittal VX25 800 mm wide enclosure (page 241).
Attaching the drive module and the LCL filter module to
the cabinet base
See Step-by-step drawings for an installation example of standard drive configuration in
Rittal VX25 800 mm wide enclosure (page 241).
Grounding the drive module and the LCL filter module
Ground the drive module and the LCL filter module from the fastening points:
Installing the drive in Rittal VX25 enclosure
For an installation example on how to install the drive module into a Rittal VX25 enclosure,
see Installation example of the standard drive module configuration (page 129) and
Step-by-step drawings for an installation example of standard drive configuration in Rittal
VX25 800 mm wide enclosure (page 241).
Mechanical installation 69
10