ABB DCS 400 - Page 95

II K 4-71
Overview of Software
ParNo.
Parameter name and significance
Min Max Default Unit (1)
custom.
setting
Grp 8 Fieldbus
Long Parameter Menu
8.01 Fieldbus Par 1
0 = Disable
no communication with PLC
1 = Fieldbus
PLC communication via fieldbus adapter
2 = RS232-Port
PLC communication via RS232 Port / Modbus
protocol
3 = Panel-Port
PLC communication via Panel Port / Modbus
protocol
4 = Res Fieldbus
Reset all fieldbus parameter (8.01...8.16) to zero
0 4 0 Text
x
8.02 Fieldbus Par 2
further information see chapter 7
0 65535 0 integer
x
8.03 Fieldbus Par 3
further information see chapter 7
0 65535 0 integer
x
8.04 Fieldbus Par 4
further information see chapter 7
0 65535 0 integer
x
8.05 Fieldbus Par 5
further information see chapter 7
0 65535 0 integer
x
8.06 Fieldbus Par 6
further information see chapter 7
0 65535 0 integer
x
8.07 Fieldbus Par 7
further information see chapter 7
0 65535 0 integer
x
8.08 Fieldbus Par 8
further information see chapter 7
0 65535 0 integer
x
8.09 Fieldbus Par 9
further information see chapter 7
0 65535 0 integer
x
8.10 Fieldbus Par 10
further information see chapter 7
0 65535 0 integer
x
8.11 Fieldbus Par 11
further information see chapter 7
0 65535 0 integer
x
8.12 Fieldbus Par 12
further information see chapter 7
0 65535 0 integer
x
8.13 Fieldbus Par 13
further information see chapter 7
0 65535 0 integer
x
8.14 Fieldbus Par 14
further information see chapter 7
0 65535 0 integer
x
8.15 Fieldbus Par 15
further information see chapter 7
0 65535 0 integer
x
8.16 Fieldbus Par 16
further information see chapter 7
0 65535 0 integer
x
(1) no chan
g
es possible if the drive is in ON-status
For detailed description see "Fieldbus Description"