ABB i-bus KNX AC/S 1.x.1 Series - Page 117

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 117
Recurrence section parameters – Weekly
Recurrence cycle in weeks.
Days of the week on which an event should be triggered every x weeks.
Parameter name
Value
Description
Every ... week(s)
on:
1...500, default = 1
The element is activated in specific weeks, e.g.
every 3rd week
Monday…Sunday
1 bit, default = false (0)
Parameters from Monday to Sunday
Note
Every ... week(s) starts from the date set in the Duration section.