ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
118 2CDC508198D0211 Rev. A | AC/S 1.x.1
Recurrence section parameters – Monthly
Recurrence cycle in months.
The day of the month on which an event should be triggered every x months.
Parameter name
Value
Description
Day ... of every 1...31, default = 1
The element is activated on a specific day in a
specific month, e.g. every 3rd day of the month
... month(s) 1...500, default = 1
The element is activated in specific months, e.g.
every 3rd month
Note
Day ... of every starts from the date set in the Duration section.