ABB i-bus KNX AC/S 1.x.1 Series - Page 134

ABB i-bus
®
KNX
Parameters
134 2CDC508198D0211 Rev. A | AC/S 1.x.1
Function Block Input (FB IN)
Input for a user-defined function block. If you wish to use the same logic several times, you can combine
and save it in a function block. In this case the function block input is used instead of an input socket.
Outputs
No.
DPT
Abbr.
Name
Visible
Description
1
Any
A
Output
Always
Parameters
Name
Value
Visible
Description
Short
description
According to DPT Always Default: E
Full
description
According to DPT Always Default: Input
Index
According to DPT
Always
Default: 0