ABB i-bus KNX AC/S 1.x.1 Series - Page 135

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 135
Function Block Output (FB OUT)
Output for a user-defined function block. If you wish to use the same logic several times, you can combine
and save it in a function block. In this case the function block output is used instead of an output socket.
Outputs
No.
DPT
Abbr.
Name
Visible
Description
1
Any
E
Input
Always
Parameters
Name
Value
Visible
Description
Short
description
According to DPT Always Default: A
Full
description
According to DPT Always Default: Output
Index
According to DPT
Always
Default: 0