ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 145
Read value at startup
Options:
No (checkbox cleared)
Yes (checkbox selected)
• No (checkbox cleared): The module behaves passively after the start and waits until it receives a new
value in the group object.
• Yes (checkbox selected): After a start, the module actively requests the current value via the group
object using a KNX Value Read telegram.
Initial values
Initial value
This parameter defines the value that is output after downloading the module. This value is output on the
web user interface and the ASM socket until a new value in the group object overwrites it.
The value range is dependent on the data point type set.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English