ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
162 2CDC508198D0211 Rev. A | AC/S 1.x.1
• And: The input values are combined using a logical AND operator.
Value 1
Value 2
Value used
0
0
0
1
0
0
0
1
0
1
1
1
Main data point type
Data point type
Definition of the data point type that is transferred between the interfaces.
You will find further information on the data point types in chapter 4.7 Data point types
.
The selection available may be restricted depending on the parameters above.