ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 163
Data point types available for the Max, Min and Avg options:
• 5.xxx [8-bit unsigned]
o 5.*
o 5.001 [percentage (0..100%]
o 5.003 [angle (degrees)]
o 5.004 [percentage (0..255)]
o 5.005 [ratio (0..255)]
o 5.010 [counter pulses (0..255)]
• 9.xxx [2-byte floating point value]
o 9.*
o 9.001 [temperature (°C)]
o 9.002 [temperature difference (K)]
o 9.003 [kelvin/hour (K/h)]
o 9.004 [lux (Lux)]
o 9.005 [speed (m/s)]
o 9.006 [pressure (Pal)]
o 9.007 [humidity (%)]
o 9.008 [parts/million (ppm)]
o 9.010 [time (s)]
o 9.011 [time (ms)]
o 9.020 [voltage (mV)]
o 9.021 [current (mA)]
o 9.022 [power density (W/m2)]
o 9.023 [kelvin/percent (K/%)]
o 9.024 [power (kW)]
o 9.025 [volume flow (l/h)]
o 9.026 [rain amount (l/h)]
o 9.027 [temperature (°F)]
o 9.028 [wind speed (km/h)]

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English