ABB i-bus
®
KNX
Parameters
172 2CDC508198D0211 Rev. A | AC/S 1.x.1
BACnet
Read + writable by BACnet
(not available if the Input option has been selected for ASM socket)
This parameter specifies how the value on BACnet is received or sent.
• Readable by BACnet: The value from the other interfaces is output in the BACnet object and cannot
be changed via BACnet.
• Read + writable by BACnet: The value can be read via BACnet and can also be changed via BACnet.
• None: The ASM does not have a BACnet interface.
Main data point type
Data point type
Definition of the data point type that is transferred between the interfaces.
You will find further information on the data point types in chapter 4.7 Data point types
.
The selection available may be restricted depending on the parameters above.