ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
188 2CDC508198D0211 Rev. A | AC/S 1.x.1
Operating mode
Options:
None
Display
Display+set (slave)
This parameter specifies whether the room thermostat outputs the operating mode (Comfort, Standby,
Economy, Building Protection) and whether this information is only to be output on the web user interface
or can also be changed by the user.
• None: The operating mode is not used in the Room ASM and therefore not displayed on the web user
interface.
• Display: The operating mode is displayed on the web user interface.
The current value is output on the ASM output socket and in a BACnet object.
• Display+set (slave): The operating mode can be changed on the web user interface. The current value
is output on the ASM output socket and in a BACnet object.
This setting functions only with ABB and Busch-Jaeger devices with the old master/slave interface.
Window status
Options:
No (checkbox cleared)
Yes (checkbox selected)
This parameter specifies whether the room's window status is displayed on the web user interface and is
to be output in the BACnet object and on the ASM output socket.
Presence detector
Options:
No (checkbox cleared)
Yes (checkbox selected)
This parameter specifies whether the room's presence status is displayed on the web user interface and is
to be output in the BACnet object and on the ASM output socket.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English