ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
192 2CDC508198D0211 Rev. A | AC/S 1.x.1
Selection of Display+set (slave) DPT 5.010 option:
Dependent parameter(s):
Fan coil unit, type of fan
Options:
3 stages
5 stages
Setting for the fan type. This setting must match the settings in the room thermostat.
• 3 stages: Fan with 3 stages (0,1,2,3)
• 5 stages: Fan with 5 stages (0,1,2,3,4,5)
Fan coil unit, dew point sensor
Options:
No (checkbox cleared)
Yes (checkbox selected)
This parameter specifies whether the status of the fan coil unit's dew point sensor is displayed on
the web user interface and is to be output in the BACnet object and on the ASM output socket.
Fan coil unit, level sensor
Options:
No (checkbox cleared)
Yes (checkbox selected)
This parameter specifies whether the status of the fan coil unit's level sensor is displayed on the
web user interface and is to be output in the BACnet object and on the ASM output socket.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English