ABB i-bus KNX AC/S 1.x.1 Series - Page 239

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 239
BACnet output objects
Object name Object type Unit COV send
condition
Room setpoint temperatures: Cooling Comfort
Analog value
°C (62)
1.0
The module has this BACnet output object if the
Yes
option is selected for the
Cooling Comfort
parameter.
Signal value:
0...50 °C
Room setpoint temperatures: Cooling Economy Analog value °C (62) 1.0
The module has this BACnet output object if the
Yes
option is selected for the
Cooling Economy
parameter.
Signal value:
0...50 °C
Room setpoint temperatures: Cooling Building Protection Analog value °C (62) 1.0
The module has this BACnet output object if the
Yes
option is selected for the Cooling Building Protection parameter.
Signal value:
0...50 °C
Room setpoint temperatures: Cooling Standby
Analog value
°C (62)
1.0
The module has this BACnet output object if the
Yes
option is selected for the
Cooling Standby
parameter.
Signal value:
0...50 °C
Room setpoint temperatures: Heating Comfort Analog value °C (62) 1.0
The module has this BACnet output object if the
Yes
option is selected for the Heating Comfort parameter.
Signal value:
0...50 °C
Room setpoint temperatures: Heating Economy Analog value °C (62) 1.0
The module has this BACnet output object if the
Yes
option is selected for the Heating Economy parameter.
Signal value:
0...50 °C
Room setpoint temperatures: Heating Building Protection
Analog value
°C (62)
1.0
The module has this BACnet output object if the
Yes
option is selected for the Heating Building Protection parameter.
Signal value:
0...50 °C
Room setpoint temperatures: Heating Standby Analog value °C (62) 1.0
The module has this BACnet output object if the
Yes
option is selected for the
Heating Standby
parameter.
Signal value:
0...50 °C