ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
292 2CDC508198D0211 Rev. A | AC/S 1.x.1
The parameter set in the ASM settings can be changed in this section via the web user interface. This is
advantageous so that the settings can be adapted to the local situation during the operating of the system
without renewed ETS programming.
The settings on the web user interface always apply. The parameters set in the ASM settings are
overwritten and only become active again on the reinstallation of the ASM.
You will find the description of the ASM settings in the chapter 7.15.2 Settings
.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English