ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 465
o 14.056 [power (W)]
o 14.057 [power factor (cos Φ)]
o 14.058 [pressure (Pa)]
o 14.059 [susceptance (Ω)]
o 14.060 [resistance (Ω)]
o 14.061 [spec.elec. resistance (Ωm)]
o 14.062 [self-inductance (H)]
o 14.063 [solid angle (sr)]
o 14.064 [volume (W/m2)]
o 14.065 [velocity (m/s)]
o 14.066 [load (Pa)]
o 14.067 [surface tension (N/m)]
o 14.068 [temperature (°C)]
o 14.069 (absolute temperature (°C)]
o 14.070 [temperature difference (K)]
o 14.071 [heat capacity (J/K)]
o 14.072 [heat conductivity (W/mK)]
o 14.073 [thermoelectrical energy (V/K)]
o 14.074[time (s)]
o 14.075 [torque (Nm)]
o 14.076 [volume (m3)]
o 14.077 [flow rate (m3/s)]
o 14.078 [weight (N)]
o 14.079 [work (J)]
You will find further information on the data point types in chapter 4.7 Data point types.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English