ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
AC/S 1.x.1 | 2CDC508198D0211 Rev. A 469
Chart area
The data recorded are displayed graphically in the chart area; you can display detailed values by pointing
using the mouse (mouseover). Click and drag to select a specific area; this area is displayed larger on
releasing the mouse button (zoom). The possible zoom settings are dependent on the recording duration
selected and the recording frequency. You can hide and show values by clicking the related marker in the
Legend section. A dedicated diagram area is displayed for each data point type used. If several objects
with the same data point type are recorded, these are displayed in the same chart area with different
colors.
Calendar function
Used to enter the required period (from/to).
Slider
Used to limit and move the required period.
Quick selection
Direct selection of standard display periods. The presets are shown dynamically, depending on the
duration of the recording.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English