ABB i-bus KNX AC/S 1.x.1 Series User Manual

ABB i-bus
®
KNX
Parameters
470 2CDC508198D0211 Rev. A | AC/S 1.x.1
Chart type
This parameter determines how the points measured are displayed:
• Line: The points measured are connected by a straight line. These lines are theoretical and do not
represent the values present at this time (linear interpolation).
• Column: Each point measured is displayed as a column.
• Level: The points measured are connected by a line where the line is at the value of the previous point
measured. These lines are theoretical and do not represent the values present at this time (linear
interpolation).
Export
You can print the trends using this function, or export them to the file formats PNG, JPG, PDF, XLSX,
CSV, JSON. Only the period actually displayed in the chart area is exported.
Newly recorded values are not added to the chart while the web user interface for this module is open.
Instead a message appears in the top right corner as soon as new values are available. The new values
can be displayed by closing and opening the web user interface view for the module.

ABB i-bus KNX AC/S 1.x.1 Series Specifications

General

Brand	ABB
Model	i-bus KNX AC/S 1.x.1 Series
Category	Controller
Language	English