ABB i-bus KNX AC/S 1.x.1 Series

ABB i-bus
®
KNX
Parameters
78 2CDC508198D0211 Rev. A | AC/S 1.x.1
Edit menu
Grid
Switches on and off the worksheet grid.
Create composite
function block
Creates a composite function block from the selected logic.
More information
Cut/Copy/Paste
Standard functionality
Undo/Redo
Standard functionality
15 undoes/redoes are possible.
Realtime menu
Real time device monitoring.
Enabling this function links the plug-in to the device and then shows the live status of the device logic.
The IP address for the connection is taken from the ETS settings.
Simulation menu
Offline simulation of the defined logic.
More information
Worksheet
The worksheet is where you create logical links.
 To create a new worksheet: click the "+" symbol.
 To rename the worksheet: double-click the tab field and overwrite it.
Properties window
The Properties window is used to parametrize logic elements. In the Name field, you can enter a unique
name for each logic element, and in the Remark field, specific information about it.