NoteAction
CAUTION
The gearbox can contain an excess of
pressure that can be hazardous. Open the
oil plug carefully in order to let the excess
pressure out.
2
xx2000001514
Place the oil collecting vessel underneath
the quick coupling.
3
xx2000001513
Remove the oil plugs and keep them
opened to speed up the drainage.
4
Plug a G3/8 quick coupling connector with
pipe to the quick coupling on base.
5
WARNING
Used oil is hazardous material and must
be disposed of in a safe way. See Decom-
missioning on page 747 for more informa-
tion.
6
Note
Draining is time-consuming.
Elapsed time varies depending on the
temperature of the oil.
Drain the gearbox oil.7
Remove the quick coupling connector and
clean the pipe after the oil is drained.
Note
There will be some oil left in the gearbox
after draining.
8
Continues on next page
132 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
4 Maintenance
4.7.2 Changing oil, axis-1 gearbox
Continued
To Next Page
Loading...
