NoteAction
Tightening torque: 3.3 Nm±3%
xx2000001604
Secure the motor with the screws.6
Tightening torque: 3 NmRemove the tool and refit the plug screw.7
For robots NOT with protection
type Clean Room
For robots with protection type Clean Room
(option 3351-4)
Plug screw: 3HAC078352-001
xx2000001609
Refit the plug screw with the rubber washer.
For robots with protection type
Clean Room (option 3351-4)
Plug screw, Clean Room:
3HAC078351-001
Rubber sealing washer:
3HAC075325-001
xx2000002496
Reconnecting the axis-4 motor connectors
NoteAction
For robots with protection type Clean Room:1
Clean the joints that have been opened and wipe
the parts free from particles with spirit on a lint
free.
Continues on next page
542 Product manual - IRB 1300
3HAC070390-001 Revision: G
© Copyright 2020-2022 ABB. All rights reserved.
5 Repair
5.6.4 Replacing the axis-4 motor
Continued
To Next Page
Loading...
