2 Installation and commissioning
2.5.1. Lifting robot with fork lift
3HAC023082-001 Revision: E62
© Copyright 2004-2008 ABB. All rights reserved.
Required equipment
Fork lift set, 3HAC 0604-1
The fork lift set, 3HAC 0604-1, is fitted to the robot as shown in the figure below.
xx0200000379
Equipment, etc. Art. no. Note
Fork lift set, incl. all required
hardware
3HAC 0604-1 See the figure Fork lift set, 3HAC 0604-1
on page 62.
Standard toolkit - The contents are defined in section
Standard toolkit on page 436 in part 2 of
the Product manual.
A Fork lift pocket (2 pcs, different from each other)
B Spacer (2 pcs)
C Horizontal attachment screws (4 pcs / fork lift pocket)
D Vertical attachment screws (2 pcs)
E Securing screw, used for IRB 6650S
Continued
Continues on next page
To Next Page
Loading...
