DescriptionAction
xx0900000122
Seal all refitted joints with sealing compound.3
xx0900000125
Use the tooling pin to even out the surface
of the sealing compound.
4
For robots with protection type Clean
Room
For robots with protection type Clean Room
Wait 10 minutes.
5
Sikaflex 521FC skin dry time (10 minutes).
3HAC036639-001Use Touch up paint Clean Room/Hygienic,
white to paint any damaged surfaces.
Note
Always read the instruction in the product
data sheet in the paint repair kit for Clean
Room/Hygienic.
6
Note
After all repair work, wipe the robot free from particles with spirit on a lint free
cloth.
Product manual - IRB 920 119
3HAC075721-001 Revision: C
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.2.4 Cut the paint or surface on the robot before replacing parts
Continued
To Next Page
Loading...
