5.3.2 Replacing the process hub
Location of the process hub
The process hub is located as shown in the figure.
xx2100001009
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 920 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC076583-001Process hub, M, Basic
3HAC076584-001Process hub, M, Basic+C1+A
3HAC076585-001Process hub, M, Basic+C1+C2+A
3HAC076611-001Outer arm cover
3HAC073940-001Gasket, Process hub
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 996.
-Standard toolkit
Continues on next page
Product manual - IRB 920 175
3HAC075721-001 Revision: C
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.3.2 Replacing the process hub
To Next Page
Loading...
