3.2.3 Transportation bracket
Location of the transportation bracket
At delivery, the robot is locked in the correct position with the transportation
brackets for securing the position during shipping and transport. The transportation
brackets cannot be removed until the robot is secured to the foundation.
Note
Keep the brackets every time when it's removed from the robot for further use.
xx2000001151
Base inner arm fixture1
Inner arm outer arm fixture2
Removing the transportation bracket
NoteAction
CAUTION
For robots with protection type Clean Room
Always cut the paint with a knife and grind the
paint edge when disassembling parts of the robot!
See Cut the paint or surface on the robot before
replacing parts on page 118.
1
Remove the screws.2
Remove the bracket.3
54 Product manual - IRB 920
3HAC075721-001 Revision: C
© Copyright 2022 ABB. All rights reserved.
3 Installation and commissioning
3.2.3 Transportation bracket
To Next Page
Loading...
