3.3.7 Lamp
3.3.7.1 Lamp on the robot
Description
A lamp with a yellow fixed light is installed on the robot.
xx2100002507
Function
The lamp is active in MOTORS ON mode.
Note
This function is NOT valid when connecting to OmniCore E10.
Further information
Further information about the MOTORS ON/MOTORS OFF mode may be found in
the product manual for the controller.
Product manual - IRB 920 69
3HAC075721-001 Revision: C
© Copyright 2022 ABB. All rights reserved.
3 Installation and commissioning
3.3.7.1 Lamp on the robot
To Next Page
Loading...
