5.6.7 Replacing the axis-3 timing belt
Location of the axis-3 timing belt
The axis-3 timing belt is located as shown in the figure.
xx2100001020
Required spare parts
Note
The spare part numbers that are listed in the table can be out of date. See the
latest spare parts of the IRB 920 via myABB Business Portal,
www.abb.com/myABB.
NoteArticle numberSpare part
3HAC070464-001Timing belt A3
Required tools and equipment
NoteArticle numberEquipment
Content is defined in section
Standard toolkit on page 996.
-Standard toolkit
Delivered as a set of calibration
tools.
Required if Axis Calibration is the
valid calibration method for the
robot.
3HAC055412-001Calibration toolbox, Axis Calibra-
tion
Continues on next page
Product manual - IRB 920 565
3HAC075721-001 Revision: C
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.6.7 Replacing the axis-3 timing belt
To Next Page
Loading...
