ABB NETA-21 - Firmware Update via ABB Web Pages

36 Network and drive connectivity configuration
Configure proxy settings
Configure the proxy details in Proxy settings if the customer network has a proxy server
for the Internet connection. The proxy server IP address and port number are required.
If the customer network requires proxy authentication, the proxy credentials are required
for the same.
Note: The customer network administration must provide the proxy server details, unless
direct connection for out-bound HTTPS data is allowed.
OPTIONAL STEP: Do this step if you use the customer network AND the proxy must be
specified. Other situations do not require you to change any settings.
To set the proxy details, go to Settings  Network services  Services.
Set the proxy server, port, user name and password (if it is required) details and save the
settings.