Need help?Do you have a question about the ABB REACT 2 Series and is the answer not in the manual?
General| Output Voltage | 230 V |
|---|---|
| Cooling Method | Natural convection |
| Battery type | Lithium-ion |
| Frequency Range | 50 Hz / 60 Hz |
| Protection Class | IP65 |
| Ambient Temperature | -25 °C to +60 °C |
| Storage Temperature | -40 °C to +70 °C |
| Max. DC power | 7.5 kW |
| Communication Interfaces | Ethernet, Wi-Fi |
| Relative Humidity | 0 - 100 % |
Explains symbols, labels, and icons used in the manual and on equipment for hazard indication.
Details the intended and allowed operational scope and general conditions for the REACT2 system.
Describes safety mechanisms like Anti-Islanding, ground fault protection, and battery state of health monitoring.
Provides comprehensive technical specifications, dimensions, and performance data for the REACT2 system components.
Explains automatic power reduction due to environmental or grid conditions to ensure safe operation.
Outlines the system's components and its role in optimizing self-consumption and energy storage.
Details the key functionalities like self-consumption optimization, multi-battery systems, and communication features.
Provides essential safety guidelines for installation, operation, and maintenance personnel.
Highlights risks associated with high temperatures and electrical hazards, including precautions for safe handling.
Lists specific safety measures and warnings for handling and operating the REACT2 battery unit.
Identifies remaining risks that cannot be eliminated and suggests remedies for safe operation.
Provides special rules and recommendations for storing the REACT2-BATT to maintain its performance.
Outlines safety requirements and regulations for transporting the equipment, especially the battery unit.
Details the procedure for unpacking and verifying the integrity and presence of all supplied components.
Specifies environmental conditions and checks required for optimal installation location and system performance.
Guides the physical installation process for the REACT2 system and its components on a wall.
Explains the procedure for connecting and configuring energy meters to the REACT2 system.
Details the process for connecting the inverter to the AC grid, including cable sizing and protection.
Covers essential checks and preparations before connecting the photovoltaic generator to the inverter.
Explains how to configure the inverter's MPPT input channels for independent or parallel operation.
Describes how to establish communication links using various interfaces like RS485, Ethernet, and Wi-Fi.
Introduces the different user interfaces available for interacting with and monitoring the inverter.
Details access and functionality of the web-based interface for inverter configuration and monitoring.
Outlines the expected accuracy and tolerances for measurements provided by the inverter.
Provides a step-by-step guide for the initial setup and configuration of the REACT2 system.
Covers crucial configuration steps including coupling type, country standards, input modes, and backup settings.
Illustrates the organization and navigation of the inverter's web user interface.
Main interface section for viewing system status, production data, and alarms.
Section for configuring various inverter parameters, including AC/DC settings, power control, and grid protection.
Details settings for network connections, including RS485, LAN, and WLAN configurations.
Provides a detailed procedure for safely shutting down the inverter before performing maintenance.
Offers guidance on diagnosing and resolving issues using error and warning signals.
Lists and explains various error codes and messages generated by the inverter for fault identification.
Details the process for measuring the PV generator's insulation resistance.
Explains the correct procedures for safely dismantling, decommissioning, and disposing of the equipment.
Lists network ports and services utilized by the inverter for communication and remote access.
Explains the requirements for configuring the inverter's network settings, including IP address and gateway.
Provides a link for additional information on ABB solar products and services.
To Next Page