IEC 61850 or
function name
ANSI Function description Generator
REG670
(Customized)
SLGAPC Logic rotating switch for function selection and LHMI
presentation
15
VSGAPC Selector mini switch 30
DPGAPC Generic communication function for Double Point
indication
16
SPC8GAPC Single point generic control function 8 signals 5
AUTOBITS Automation bits, command function for DNP3.0 3
SINGLECMD Single command, 16 signals 4
I103CMD Function commands for IEC 60870-5-103 1
I103GENCMD Function commands generic for IEC 60870-5-103 50
I103POSCMD IED commands with position and select for IEC
60870-5-103
50
I103POSCMDV IED direct commands with position for IEC 60870-5-103 50
I103IEDCMD IED commands for IEC 60870-5-103 1
I103USRCMD Function commands user defined for IEC 60870-5-103 4
Secondary system
supervision
CCSSPVC 87 Current circuit supervision 0-5
FUFSPVC Fuse failure supervision 0-3
VDSPVC 60 Fuse failure supervision based on voltage difference 0-2
Logic
SMPPTRC 94 Tripping logic 12
SMAGAPC General start matrix block 12
STARTCOMB Start combinator 32
TMAGAPC Trip matrix logic 12
ALMCALH Logic for group alarm 5
WRNCALH Logic for group warning 5
INDCALH Logic for group indication 5
AND, GATE, INV,
LLD, OR,
PULSETIMER,
RSMEMORY,
SRMEMORY,
TIMERSET, XOR
Basic configurable logic blocks (see Table 3) 40-420
Table continues on next page
Section 3 1MRK 502 073-UUS A
Available functions
36 Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062
Commissioning manual
To Next Page
Loading...
