ABB REG670 - Verifying the IEEE C37.118;1344 UDP Communication

IEC140000144 V1 EN-US
Figure 36: Captured synchrophasor data
11.5.2 Verifying the IEEE C37.118/1344 UDP communication
GUID-F0D1117D-3D0F-498F-A00C-242763F8A4E6 v1
After setting both PMU configuration and the UDP client configuration (As explained
in sections
Setting the PMU station communication (PMU Report), Setting the PMU
station communication (PMU configuration) and Setting the TCP/UDP client
communication) and making sure that the Ethernet communication is set up, click
Connect on the PMU Connection Tester tool.
IEC140000145-1-en.vsd
IEC140000145 V1 EN-US
Figure 37: Verifying the UDP communication using PMU Connection Tester
1MRK 502 073-UUS A Section 11
Establishing connection and verifying the IEEE C37.118/1344 communication
Generator protection REG670 2.2 ANSI and Injection equipment REX060, REX061, REX062 121
Commissioning manual