BitA RegA IEC 61850 name SA name Description Values
3645 227.13 .mcd
3646 227.14 .SPCS08.stVal Ouput state 8 0/1=Off/On
3647 227.15 .mcd
3648 228.00 .SPCS09.stVal Ouput state 9 0/1=Off/On
3649 228.01 .mcd
3650 228.02 .SPCS10.stVal Ouput state 10 0/1=Off/On
3651 228.03 .mcd
3652 228.04 .SPCS11.stVal Ouput state 11 0/1=Off/On
3653 228.05 .mcd
3654 228.06 .SPCS12.stVal Ouput state 12 0/1=Off/On
3655 228.07 .mcd
3656 228.08 .SPCS13.stVal Ouput state 13 0/1=Off/On
3657 228.09 .mcd
3658 228.10 .SPCS14.stVal Ouput state 14 0/1=Off/On
3659 228.11 .mcd
3660 228.12 .SPCS15.stVal Ouput state 15 0/1=Off/On
3661 228.13 .mcd
3662 228.14 .SPCS16.stVal Ouput state 16 0/1=Off/On
3663 228.15 .mcd
2.3.2 Registers
Table 76: Explanations of the registers table columns
Column name
Description
Type Type of the register. The alternatives are u16, u32 (unsigned 16 and 32 bits
integer) or i16, i32 (signed 16 and 32 bit integer).
Scale Scale factor as default. Also, an adjustable offset value exists that is set to 0 by
default.
IEC 61850
name
Original IED data object identification. Described in the IEC 61850 format as
Logical Device.Logical Node and thereafter .Data Object.Data Attribute. Logical
Node is the same as the application function block name.
SA name The signal may have a defined label that is visible for example in ACT.
Description Short description of the signal. See the application function block documentation
for more details.
Values The value range of the original IEC 61850 value, that is, before scaling.
1MRS757057 B Section 2
Modbus data mappings
REU615 43
Point List Manual
To Next Page
Loading...
