1MAC309294-MB F Section 3
Basic functions
RER620 81
Technical Manual
3.11.2.5 Monitored data
Table 101: CONTROL Monitored data
3.12 Factory settings restoration
In case of configuration data loss or any other file system error that prevents the relay from
working properly, the whole file system can be restored to the original factory state. All
default settings and configuration files stored in the factory are restored. For further
information on restoring factory settings, see the operation manual.
Parameter Type Valu es (Ra nge) Unit Description
Command
response
ENUM 1 = "Select open"
2 = "Select close"
3 = "Operate open"
4 = "Operate close"
5 = "Direct open"
6 = "Direct close"
7 = "Cancel"
8 = "Position reached"
9 = "Position timeout"
10 = "Object status only"
11 = "Object direct"
12 = "Object select"
13 = "RL local allowed"
14 = "RL remote allowed"
15 = "RL off"
16 = "Function off"
17 = "Function blocked"
18 = "Command progress"
19 = "Select timeout"
20 = "Missing authority"
21 = "Close not enabled"
22 = "Open not enabled"
23 = "Internal fault"
24 = "Already close"
25 = "Wrong client"
26 = "RL station allowed"
27 = "RL change"
Latest command response
LR state ENUM 1 = "OFF"
2 = "Local"
3 = "Remote"
4 = "Station"
LR state monitoring for
PCM
To Next Page
Loading...
