Commissioning
System Manual
110
6.4.5 Defining trustworthy devices
Outdoor stations, indoor station and the IP switch actuators must be joined to each other. This
specifies the indoor station from which the door is allowed to be opened.
Fig. 89: Joining device together
To join the devices, perform the following steps:
1. Connect a PC with the "Smart Access Point".
– More detailed information for connecting, see chapter 6.4.3 “Reconnect the "Smart
Access Point"“ on page 105.
2. In the main menu of the "Smart Access Point", change to the "Door communication"
function.
3. Navigate to the desired outdoor station.
– Multiple selection of outdoor stations [1].
– Single selection of an outdoor station [2].
4. Switch to the "Trusted devices" function.
5. Select the indoor stations that are to communicate with this outdoor station (or the selected
outdoor stations at multiple selection).
6. Confirm the selection.
The devices are joined together.
To Next Page
Loading...
