Commissioning
System Manual
89
6.3.4 Commissioning the "Smart Access Point"
When the "Smart Access Point" is connected to the PC and the start page of the "Smart Access
Point" is called up in the browser, the "Smart Access Point" is ready for commissioning.
During commissioning a wizard guides through the individual steps.
Commissioning must be carried out in the following situations:
■
For initial commissioning
■
After a reset to the factory settings
To commission the device, perform the following steps:
Fig. 65: Commissioning "Smart Access Point": Language
1. Select the language.
Fig. 66: Commissioning "Smart Access Point": Licence agreements
To Next Page
Loading...
