ABB Welcome IP - 5.5 Indoor stations IP touch: FM installation boxes and plastered boxes

Connection, installation / mounting
System Manual
│
44
5.5 Indoor stations IP touch: FM installation boxes and plastered boxes
5.5.1 Mounting in solid walls
For mounting the installation boxes in solid walls, perform the following points:
7 mm
1
3
2
Fig. 23: Mounting installation boxes in solid walls: Plastered box
1. Chisel a hole according to the size of the indoor station used into the wall provided.
– The suitable template is enclosed with the box.
– Dimensional drawings, see chapter 5.9.4 “Installation boxes - flush-mounted installation“
on page 59.
– The installation depth of the box is 54 mm.
2. Insert the plastered box.
– Feed the connecting cable [1] through the desired opening.
– Attach the protective cover [2].
– Insert the plastered box [3].