ABB Welcome IP - Physical Addresses - Preparing Addressing

Commissioning
System Manual
│
67
6.2.2 Physical addresses ― Preparing addressing
If the devices have a display, the addressing is carried out on the device itself.
If the devices do not have a display, the addressing is carried out via the IP Touch 7.
Devices with display
– As soon as the devices are supplied with voltage via the PoE switch, the device boots up
automatically.
The devices are prepared for addressing.
Devices without display
– Connect the devices to the indoor station via a PoE switch.
– As soon as the devices are supplied with voltage via the PoE switch, the device boots
up automatically.
The devices are prepared for addressing.